Smart wifi smoke detector hidden camera

Features:

· WiFi remote real-time viewing

· Motion detection + alarm push

· 1080P/720P HD resolution

· Supports Android / iOS version

· Automatically Night Vision

· Support up to 64GB of memory

· Loop recording

· 120° lens shooting angle

How to set up the Smoke Detector Hidden Camera :

1. Download the APP, and register your account.

2. Charge the camera for 4~6 hours.

3. Install the micro SD card (not included in the package) for keep recordings

4.Turn on camera, red light will steady on, wait for 20 seconds, the red light will flash and you will hear voice prompt of "Ready to Pair".

5. Please use pin to hold the reset button for 7-8 seconds, the red light will go off and you will hear a AI voice of “Reset Successfully”, then release the reset button. The red light will light on again after 10s and you will hear AI voice of "Ready to Pair", which means reset has

completed.

6. Pair the camera through the following path in the app|:

Click "Add device" on the homepage>>Click "Camera&Clock">>Click "QR Code">>Click "Wi-Fi Mode">>Click "Next Step">>Click "AP MDeo">>Enter your home router 2.4GHz WiFi network and name>>Click "Next">>Click "Go to connect">>access the wifi settings of your phone, find and connect the device's hotspot, which is named with “SmartLife-xxxx” or “SL-xxxx "

7. Return to the app and it will automatically jump to the Adding device interface. If it does not automatically jump to this interface, please click "please click "Confirm hot spot connecton, next" to enter the pairing interface), wait for successful pairing.

8.Pair successfully and enjoy your Smoke Detector Hidden Camera .

Troubleshooting steps:

1. Please check if the camera is charged correctly, please use the USB cable and ≥1A charger (not included) provided in the package to charge the camera. The charging time is 4 to 6 hours, and the battery life after a full charge is about 3.5 hours. If you use a different type of USB cable to charge the camera, it may result in failure to charge or even damage to the camera.

2. If the camera cannot connect, please check whether the entered WiFi network name and password are correct. The camera only supports a 2.4GHz WiFi network. If the wrong WiFi network information is entered, the camera will not be able to connect successfully.

3. Please reset the camera before connecting it, otherwise the camera will not be able to connect successfully.

Note:

1. The Smoke Detector Hidden Camera has no real smoke detection function.

2. The Smoke Detector Hidden Camera only supports 2.4 GHz WiFi connection.

3. The Smoke Detector Hidden Camera supports up to 64GB SD card (not included in the package).

4. The Smoke Detector Hidden Camera can record continuously for about 4 hours after fully charged. It is recommended keep the camera charging while recording for 24/7 operation.

5. This camera does not support audio recording function.

6. You can adjust the video pixels in the app according to your WiFi network signal to make the video clearer and smoother.

7. Motion detection has three sensitivity levels, it can be adjusted in the app according to your needs.

8.The strength of the WiFi network signal will affect recording stability.

9. Since the device is a WiFi camera, there are many steps to set it up. We have uploaded a detailed setting video on the product details page. Please view the video it if you need it.

Product information of Smoke Detector Hidden Camera

Technical Details